Close

SW63

NC - SP - ST

The SW63 is a miniature series single pole, free standing, compact contactor.  It is designed to fill the gap between 30 ampere relays and 100 ampere contactors.  Devised for both interrupted and uninterrupted loads, the SW63 is suitable for switching Resistive, Capacitive and Inductive loads.  Typical applications include switching small traction motors, hydraulic power packs and small electric winch motors.

The SW63 features single pole double breaking main contacts with silver alloy tips, which are weld resistant, hard wearing and have excellent conductivity.  The SW63 has M6 stud main terminals and 6.3mm spade coil connections.  It can be mounted via M4 tapped holes or mounting brackets – either supplied fitted, or as separate items.  Mounting can be on the side or base of the contactor.

Please note Normally Closed contacts are not suited to make and break load.

SW63 Technical Information

Application
InterruptedRating ( Ith )Uninterrupted
Thermal Current Rating - 80A
Intermittent Current Rating:
30% Duty - 145A
40% Duty - 125A
50% Duty - 115A
60% Duty - 105A
70% Duty - 95A
Rated Fault Current Breaking Capacity (Icn) 5ms Time Constant: (In accordance with UL583*)
Blowouts -
No Blowouts -
Rated Fault Current Breaking Capacity (Icn) Resistive Load: (In accordance with UL508*)
Blowouts 120A at 96V D.C.
No Blowouts 120A at 60V D.C.
Maximum Recommended Contact Voltages
Blowouts 96V 120V
No Blowouts 48V 60V
Typical Voltage Drop per pole across New Contacts at 80A 40mV

Mechanical Durability > 3,000,000 Cycles
Coil Voltage Available (Us) (Rectifier board required for A.C.) 6 - 130V

SW63 Features

Component Configurations
Auxiliary
STANDARD
V4
Coil Suppression
DIODE
DIODE AND RESISTOR
BI-DIRECTIONAL DIODE
Coil Terminations
AMP TAGS

%s Resources

SW63 Data Sheet

  • Format: .pdf
  • Size: 806kb

  • Name
  • Company
  • Contact number
  • Email address
  • Your message
  • The SW63 has the following optional components available: