Albright International

SW200

NO - SP - ST

The SW200 has been designed for direct current loads, including motors as used on electric vehicles such as industrial trucks.  Developed for both interrupted and uninterrupted loads, the SW200 is suitable for switching Resistive, Capacitive and Inductive loads. The SW200 features single pole single throw, double breaking main contacts with silver alloy tips, which are weld resistant, hard wearing and have excellent conductivity.  The SW200 has M10 stud main terminals and 6.3mm spade coil connections.  It can be mounted via M5 tapped holes or mounting brackets – either supplied fitted, or as separate items.  Mounting can be horizontal or vertical, when vertical the M10 contact studs should point upwards. If the requirement is for downwards orientation we can adjust the contactor to compensate for this.

Show product Options or make an enquiry.
The SW200 has the following optional components available :

Enquire about product

This is largely an automated form that outputs things based on the product where it's displayed, do not touch
  • Make an enquiry

  • Name
  • Company
  • Contact number
  • Email address
  • Your message

Technical Information

Application Interrupted Uninterrupted
Thermal Current Rating 250A 400A
Intermittent Current Rating:
30% Duty 455A 730A
40% Duty 395A 630A
50% Duty 355A 565A
60% Duty 325A 515A
70% Duty 300A 480A
Rated Fault Current Breaking Capacity (Icn) 5ms Time Constant: (In accordance with UL583*)
Blowouts 1500A at 96V D.C.
No Blowouts 1500A at 48V D.C.
Rated Fault Current Breaking Capacity (Icn) Resistive Load: (In accordance with UL508*)
Blowouts 600A at 96V D.C.
No Blowouts 600A at 60V D.C.
Maximum Recommended Contact Voltages
Blowouts 96V 96V
No Blowouts 48V 60V
Typical Voltage Drop per pole across New Contacts at 250A 40mV
Mechanical M.T.B.F >5000000 Operations
Coil Voltage Available (Us) (Rectifier board required for A.C.) 6 - 240V

Features

Component Configurations
Auxiliary
Auxilary---Standard
STANDARD
Auxilary---Gold
STANDARD - GOLD
Auxilary---V3
V3
Auxilary---V3---Gold
V3 - GOLD
Coil Suppression
Suppression---Diode
DIODE
Suppression---Resistor-and-Diode
DIODE AND RESISTOR
Suppression---Bi-Directional-Diode
BI-DIRECTIONAL DIODE
Coil Terminations
Coil Termination - Standard
AMP TAGS
Coil Termination - Flying Leads
FLYING LEADS
Coil Termination - Vaccum Impreg
VACCUM IMPREGNATION
Mounting Options
Brackets - Top Hat
Top Hat Bracket Kit
Brackets---L
'L' Shaped Bracket Kit

Downloads

Resources
SW200 Series Catalogue Download
SW200 Spares Download
+44 (0) 1256 893060
UK Business Hours
Mon - Thu: 8:30 - 16:45 | Fri: 8:30 - 15:30