Close

SU280P

NO - SP - ST - IP66

The SU280P has been designed for direct current loads, particularly motors as used on electronic vehicles such as industrial trucks and airport tractors.

The contactors feature double breaking main contacts with silver alloy tips, which are weld resistant, hard wearing and have excellent conductivity.  The SU280P offers greater environmental protection (IP66) and is easy to install, with a range of mounting brackets available.  To ensure IP66, mounting holes are not accessible.  Mounting can be vertical or horizontal, when vertical the M10 contact studs should point upwards.  If the requirement is for downwards orientation we can adjust the contactor to compensate for this.

SU280P Technical Information

Application
InterruptedRating ( Ith )Uninterrupted
Thermal Current Rating 250A 350A
Intermittent Current Rating:
30% Duty 455A 640A
40% Duty 395A 555A
50% Duty 355A 495A
60% Duty 325A 450A
70% Duty 300A 420A
Rated Fault Current Breaking Capacity (Icn) 5ms Time Constant: (In accordance with UL583*)
Blowouts 1500A at 80V D.C.
No Blowouts 1500A at 48V D.C.
Rated Fault Current Breaking Capacity (Icn) Resistive Load: (In accordance with UL508*)
Blowouts 525A at 96V D.C.
No Blowouts 525A at 60V D.C.
Maximum Recommended Contact Voltages
Blowouts 96V 96V
No Blowouts 48V 60V
Typical Voltage Drop per pole across New Contacts at 250A 40mV

Mechanical Durability > 3,000,000 Cycles
Coil Voltage Available (Us) (Rectifier board required for A.C.) 6 - 240V

SU280P Features

Component Configurations
Coil Suppression
DIODE
DIODE AND RESISTOR
BI-DIRECTIONAL DIODE
Coil Terminations
AMP TAGS
Mounting Options
Top Hat Bracket Kit
'L' Shaped Bracket Kit
Curved Bracket Kit

SU280P Resources

SU280P Data Sheet

  • Format: .pdf
  • Size: 783kb

Make an Enquiry

  • Name
  • Company
  • Contact number
  • Email address
  • Your message
  • The SU280P has the following optional components available: