Close

SW688P

MOTOR REVERSING

The SW688P is a miniature series single pole, free standing, compact contactor which is sealed to IP66. The SW688P has been designed for Motor Reversing applications with direct current loads, particularly motors as used on small traction motors, hydraulic power packs and small electric winch motors. Developed for both interrupted and uninterrupted loads, it is suitable for switching Resistive, Capacitive and Inductive loads.

The SW688P features paired double pole double breaking main contacts with silver alloy tips, which are weld resistant, hard wearing and have excellent conductivity. The SW688P incorporates an enclosed top cover and offers environmental protection to IP66. The SW688P has M6 stud main terminals and 6.3mm spade coil connections. Mounted using supplied brackets, or as separate items. Mounting can be on the side or base of the contactor.

SW688P Technical Information

Application
InterruptedRating ( Ith )Uninterrupted
Thermal Current Rating 80A 80A
Intermittent Current Rating:
30% Duty 145A 145A
40% Duty 125A 125A
50% Duty 115A 115A
60% Duty 105A 105A
70% Duty 95A 95A
Rated Fault Current Breaking Capacity (Icn) 5ms Time Constant: (In accordance with UL583*)
Blowouts -
No Blowouts 400A at 48V D.C.
Rated Fault Current Breaking Capacity (Icn) Resistive Load: (In accordance with UL508*)
Blowouts -
No Blowouts 0A at 48V D.C.
Maximum Recommended Contact Voltages
Blowouts 0V 0V
No Blowouts 96V 120V
Typical Voltage Drop per pole across New Contacts at 80A 40mV

Mechanical Durability > 3,000,000 Cycles
Coil Voltage Available (Us) (Rectifier board required for A.C.) 6 - 130V

SW688P Features

Component Configurations
Coil Suppression
DIODE
DIODE AND RESISTOR
BI-DIRECTIONAL DIODE
Coil Terminations
AMP TAGS

SW688P Resources

SW688P Data Sheet

  • Format: .pdf
  • Size: 918kb

Make an Enquiry

  • Name
  • Company
  • Contact number
  • Email address
  • Your message
  • The SW688P has the following optional components available: