Close

SW60P

NO - SP - ST - IP66

The SW60P is a miniature series single pole, free standing, compact contactor which is sealed to IP66.  The SW60P is designed to fill the gap between 30 ampere relays and 100 ampere contactors. Devised for both interrupted and uninterrupted loads, it is suitable for switching Resistive, Capacitive and Inductive loads.  Typical applications include switching small traction motors, hydraulic power packs and small electric winch motors.

The SW60P features single pole double breaking main contactors with silver alloy tips, which are weld resistant, hard wearing and have excellent conductivity.  The SW60P incorporates an enclosed top cover and offers environmental protection to IP66.  The SW60P has M6 stud main terminals and 6.3mm spade coil connections.  It can be mounted via mounting brackets (supplied fitted).  Mounting can be on the side or base of the contactor.

 

 

SW60P Technical Information

Application
InterruptedRating ( Ith )Uninterrupted
Thermal Current Rating 80A 80A
Intermittent Current Rating:
30% Duty 145A 145A
40% Duty 125A 125A
50% Duty 115A 115A
60% Duty 105A 105A
70% Duty 95A 95A
Rated Fault Current Breaking Capacity (Icn) 5ms Time Constant: (In accordance with UL583*)
Blowouts 400A at 96V D.C.
No Blowouts 400A at 48V D.C.
Rated Fault Current Breaking Capacity (Icn) Resistive Load: (In accordance with UL508*)
Blowouts 120A at 96V D.C.
No Blowouts 120A at 48V D.C.
Maximum Recommended Contact Voltages
Blowouts 96V 120V
No Blowouts 48V 60V
Typical Voltage Drop per pole across New Contacts at 80A 40mV

Mechanical Durability > 3,000,000 Cycles
Coil Voltage Available (Us) (Rectifier board required for A.C.) 6 - 130V

SW60P Features

Component Configurations
Coil Suppression
DIODE
DIODE AND RESISTOR
BI-DIRECTIONAL DIODE
Coil Terminations
AMP TAGS

SW60P Resources

SW60P Data Sheet

  • Format: .pdf
  • Size: 506kb

Make an Enquiry

  • Name
  • Company
  • Contact number
  • Email address
  • Your message
  • The SW60P has the following optional components available: