Close

PC63

NC - SP - ST

The PC63 is a miniature series single pole contactor designed for printed circuit board mounting.  Devised for both interrupted and uninterrupted loads, the PC63 is suitable for switching Resistive, Capacitive and Inductive loads.  Typical applications include Telecommunication, UPS and other power conversion systems.

The PC63 features single pole double breaking main contacts with silver alloy tips, which are weld resistant, hard wearing and have excellent conductivity.  The PC63 can be secured to the printed circuit board by means of an M4 bolt.

Note: The PC range now incorporates the mounting board option, previously assigned to the MB range (existing MB part numbers remain valid).

PC63 Technical Information

Application
InterruptedRating ( Ith )Uninterrupted
Thermal Current Rating - 80A
Intermittent Current Rating:
30% Duty - 145A
40% Duty - 125A
50% Duty - 115A
60% Duty - 105A
70% Duty - 95A
Rated Fault Current Breaking Capacity (Icn) 5ms Time Constant: (In accordance with UL583*)
Blowouts -
No Blowouts -
Rated Fault Current Breaking Capacity (Icn) Resistive Load: (In accordance with UL508*)
Blowouts 120A at 96V D.C.
No Blowouts 120A at 48V D.C.
Maximum Recommended Contact Voltages
Blowouts 96V 120V
No Blowouts 48V 60V
Typical Voltage Drop per pole across New Contacts at 80A 40mV

Mechanical Durability > 3,000,000 Cycles
Coil Voltage Available (Us) (Rectifier board required for A.C.) 6 - 130V

PC63 Features

Component Configurations
Auxiliary
STANDARD
Coil Terminations
PCB

%s Resources

PC63-MB63 Data Sheet

  • Format: .pdf
  • Size: 906kb

  • Name
  • Company
  • Contact number
  • Email address
  • Your message
  • The PC63 has the following optional components available: