Close

SW85P

NC - SP - ST - IP66

The SW85P has been designed for direct current loads, particularly motors as used on electric vehicles such as industrial trucks.  Developed for both interrupted and uninterrupted loads, the SW85P is suitable for switching Resistive, Capacitive and Inductive loads.

The SW85P features single pole double breaking main contacts with silver alloy tips, which are weld resistant, hard wearing and have excellent conductivity.  The SW85P features an enclosed top cover and offers environmental protection to IP66. The SW85P has M8 stud main terminals and 6.3mm spade coil connections.  Mounted using supplied brackets, mounting can be horizontal or vertical, when vertical the M8 contact studs should point downwards.  If the requirement is for upwards orientation we can adjust the contactor to compensate for this.

Please note normally closed contacts are not designed to make and break load.

SW85P 技術情報

アプリケーション(用途)
断続定格(Ith )連続
熱電流定格 100A 100A
断続的な電流定格
30% デューティ 185A 185A
40% デューティ 160A 160A
50% デューティ 140A 140A
60% デューティ 130A 130A
70% デューティ 120A 120A
定格故障電流遮断容量(Icn)5ms時定数: (UL583 *に準拠)
ブローアウト -
ブローアウト無し 800A at 48V D.C.
定格故障電流遮断容量(Icn)抵抗負荷: (UL508 *に準拠)
ブローアウト -
ブローアウト無し -
最大推奨接点電圧
ブローアウト - -
ブローアウト無し 48V 48V
新しい接点での極ごとの一般的な電圧降下100A 50mV

機械的耐久性 > 5,000,000 Cycles
使用可能なコイル電圧(Us)(ACには整流器ボードが必要です) 6 - 240V

SW85P 機能

構成 構成
コイル・サプレッション
コイル終端

%s リソース

SW85P Data Sheet

  • フォーマット: .pdf
  • サイズ: 868kb

フォームが見つかりませんでした。