Close

SW200

NO - SP - ST

The SW200 has been designed for direct current loads, including motors as used on electric vehicles such as industrial trucks.  Developed for both interrupted and uninterrupted loads, the SW200 is suitable for switching Resistive, Capacitive and Inductive loads. The SW200 features single pole single throw, double breaking main contacts with silver alloy tips, which are weld resistant, hard wearing and have excellent conductivity.  The SW200 has M10 stud main terminals and 6.3mm spade coil connections.  It can be mounted via M5 tapped holes or mounting brackets – either supplied fitted, or as separate items.  Mounting can be horizontal or vertical, when vertical the M10 contact studs should point upwards. If the requirement is for downwards orientation we can adjust the contactor to compensate for this.

SW200 技術情報

アプリケーション(用途)
断続定格(Ith )連続
熱電流定格 250A 400A
断続的な電流定格
30% デューティ 455A 730A
40% デューティ 395A 630A
50% デューティ 355A 565A
60% デューティ 325A 515A
70% デューティ 300A 480A
定格故障電流遮断容量(Icn)5ms時定数: (UL583 *に準拠)
ブローアウト 1500A at 96V D.C.
ブローアウト無し 1500A at 48V D.C.
定格故障電流遮断容量(Icn)抵抗負荷: (UL508 *に準拠)
ブローアウト 600A at 96V D.C.
ブローアウト無し 600A at 60V D.C.
最大推奨接点電圧
ブローアウト 96V 96V
ブローアウト無し 48V 60V
新しい接点での極ごとの一般的な電圧降下250A 40mV

機械的耐久性 > 5,000,000 Cycles
使用可能なコイル電圧(Us)(ACには整流器ボードが必要です) 6 - 240V

SW200 機能

構成 構成
補助
コイル・サプレッション
コイル終端
取り付けオプション

フォームが見つかりませんでした。