Close

SW181

SP - DT

The SW181 has been designed for direct current loads, including motors as used on electric vehicles such as industrial trucks.  Developed for both interrupted and uninterrupted loads, the SW181 is suitable for switching Resistive, Capacitive and Inductive loads.

The SW181 features single pole double throw, double breaking main contacts with silver alloy tips, which are weld resistant, hard wearing and have excellent conductivity.  The SW181 has M8 stud main terminals and 6.3mm spade coil connections. It can be mounted via M4 tapped holes or mounting brackets – either supplied fitted, or as separate items.  Mounting can be horizontal or vertical, when vertical the M8 contact studs should point upwards.  If the requirement is for downwards orientation we can adjust the contactor to compensate for this.

Please note Normally Closed contacts are not suited to make and break load.

 

SW181 技術情報

アプリケーション(用途)
断続定格(Ith )連続
熱電流定格 150A 150A
断続的な電流定格
30% デューティ 275A 275A
40% デューティ 235A 235A
50% デューティ 210A 210A
60% デューティ 195A 195A
70% デューティ 180A 180A
定格故障電流遮断容量(Icn)5ms時定数: (UL583 *に準拠)
ブローアウト 1000A at 96V D.C.
ブローアウト無し 1000A at 48V D.C.
定格故障電流遮断容量(Icn)抵抗負荷: (UL508 *に準拠)
ブローアウト -
ブローアウト無し -
最大推奨接点電圧
ブローアウト 96V -
ブローアウト無し 48V -
新しい接点での極ごとの一般的な電圧降下150A 40mV

機械的耐久性 > 5,000,000 Cycles
使用可能なコイル電圧(Us)(ACには整流器ボードが必要です) 6 - 240V

SW181 機能

構成 構成
補助
コイル・サプレッション
コイル終端

フォームが見つかりませんでした。