The DC88-1000P motor reversing type of contactors has been designed for direct current loads, particularly motors as used on electric vehicles such as industrial trucks. The DC88-1000P Type is a monoblock construction, resulting in a neat compact design which is compatible with modern electronic control systems. Developed for both interrupted and uninterrupted loads, the DC88-1000P Type is suitable for switching Resistive, Capacitive and Inductive loads. The DC88-1000P Type is sealed to IP67 thus offering greater protection against adverse environments such as water or dust, and allowing for water immersion up to 1 metre.
The main contact circuit, designed for motor reversing, has a built in failsafe, so that if both coils are energised simultaneously the contact arrangement is open circuit. The DC88-1000P Type has double breaking main contacts with silver alloy contact tips, which are weld resistant, hard wearing and have excellent conductivity. The DC88-1000P Type M8 main stud terminals can be configured in a variety of ways in order to suit the application. Coil connections are by means of 6.3mm spades and mounting is via the moulded bracket and can be horizontal or vertical, when vertical the M8 contact studs should point upwards. If the requirement is for downwards orientation we can adjust the contactor to compensate for this.
|定格故障電流遮断容量（Icn）5ms時定数： （UL583 *に準拠）|
|ブローアウト無し||800A at 48V D.C.|
|定格故障電流遮断容量（Icn）抵抗負荷： （UL508 *に準拠）|
|機械的耐久性||> 5,000,000 Cycles|
|使用可能なコイル電圧（Us）（ACには整流器ボードが必要です）||6 - 240V|