Close

PC61

SP - DT

The PC61 is a miniature series single pole double throw contactor designed for printed circuit board mounting.  Devised for both interrupted and uninterrupted loads, the PC61 is suitable for switching Resistive, Capacitive and Inductive loads.  Typical applications include Telecommunication, UPS and other power conversion systems.

The PC61 features single pole double breaking main contacts with silver alloy tips, which are weld resistant, hard wearing and have excellent conductivity.  The PC61 can be secured to the printed circuit board by means of an M4 bolt.

Note: The PC range now incorporates the mounting board option, previously assigned to the MB range (existing MB part numbers remain valid).

PC61 Technical Information

Application
InterruptedRating ( Ith )Uninterrupted
Thermal Current Rating 80A 80A
Intermittent Current Rating:
30% Duty 145A 145A
40% Duty 125A 125A
50% Duty 115A 115A
60% Duty 105A 105A
70% Duty 95A 95A
Rated Fault Current Breaking Capacity (Icn) 5ms Time Constant: (In accordance with UL583*)
Blowouts 400A at 96V D.C.
No Blowouts 400A at 48V D.C.
Rated Fault Current Breaking Capacity (Icn) Resistive Load: (In accordance with UL508*)
Blowouts 120A at 96V D.C.
No Blowouts 120A at 48V D.C.
Maximum Recommended Contact Voltages
Blowouts 96V 120V
No Blowouts 48V 60V
Typical Voltage Drop per pole across New Contacts at 80A 40mV

Mechanical Durability > 3,000,000 Cycles
Coil Voltage Available (Us) (Rectifier board required for A.C.) 6 - 130V

PC61 Features

Component Configurations
Auxiliary
STANDARD
Coil Terminations
PCB

Aïe ! Nous n’avons pas retrouvé votre formulaire.