Close

ED520

EMERGENCY DISCONNECT

The ED520 range of switches have been designed to provide a rapid means of disconnecting batteries or other power supplies in the event of serious electrical faults.  Whilst the switches are primarily intended for use with battery powered vehicles they are also suitable for use with static power systems.  All types are capable of safely rupturing full load battery currents in the event of an emergency.

The ED520 is a manually operated device with a snap action for both opening and closing of the main contacts.  The ED520 is easy to install and can be mounted using the main terminal busbars or secured with supplied M5 posidrive mounting screws on the frame of the device.

Precautions:

The switch is to be used to rupture current in an emergency or as a no-load isolator.

Do not use as a regular On-Load Switching Device.

 

 

ED520 Technical Information

Application
InterruptedRating ( Ith )Uninterrupted
Thermal Current Rating - 500A
Intermittent Current Rating:
30% Duty - 915A
40% Duty - 790A
50% Duty - 705A
60% Duty - 645A
70% Duty - 600A
Rated Fault Current Breaking Capacity (Icn) 5ms Time Constant: (In accordance with UL583*)
Blowouts -
No Blowouts -
Rated Fault Current Breaking Capacity (Icn) Resistive Load: (In accordance with UL508*)
Blowouts -
No Blowouts 750A at 60V D.C.
Maximum Recommended Contact Voltages
Blowouts - -
No Blowouts - 60V
Typical Voltage Drop per pole across New Contacts at 500A 50mV

Mechanical Durability > 10,000 Cycles
Coil Voltage Available (Us) (Rectifier board required for A.C.) 0 - 0V

ED520 Features

Component Configurations
Auxiliary
STANDARD
Mounting Options
M5 Tapped Holes

Aïe ! Nous n’avons pas retrouvé votre formulaire.