Close

SW688

MOTOR REVERSING

The SW688 is a miniature series double pole, free standing, compact contactor.  It is designed for Motor Reversing applications with direct current loads, particularly motors as used on small traction motors, hydraulic power packs and small electric winch motors.  Developed for both interrupted and uninterrupted loads, the SW688 is suitable for switching Resistive, Capacitive and Inductive loads.

The SW688 features double pole double breaking main contacts with silver alloy tips, which are weld resistant, hard wearing and have excellent conductivity.  The SW688 has M6 stud main terminals and 6.3mm spade coil connections.  Mounted using supplied brackets, mounting can be horizontal or vertical, when vertical the M6 contact studs should point upwards.  If the requirement is for downwards orientation we can adjust the contactor to compensate for this.

SW688 Technical Information

Application
InterruptedRating ( Ith )Uninterrupted
Thermal Current Rating 80A 80A
Intermittent Current Rating:
30% Duty 145A 145A
40% Duty 125A 125A
50% Duty 115A 115A
60% Duty 105A 105A
70% Duty 95A 95A
Rated Fault Current Breaking Capacity (Icn) 5ms Time Constant: (In accordance with UL583*)
Blowouts -
No Blowouts 400A at 48V D.C.
Rated Fault Current Breaking Capacity (Icn) Resistive Load: (In accordance with UL508*)
Blowouts -
No Blowouts 120A at 48V D.C.
Maximum Recommended Contact Voltages
Blowouts - -
No Blowouts 96V 120V
Typical Voltage Drop per pole across New Contacts at 80A 40mV

Mechanical Durability > 3,000,000 Cycles
Coil Voltage Available (Us) (Rectifier board required for A.C.) 6 - 130V

SW688 Features

Component Configurations
Coil Suppression
DIODE
DIODE AND RESISTOR
BI-DIRECTIONAL DIODE
Coil Terminations
AMP TAGS

Oops! Wir konnten dein Formular nicht lokalisieren.