The SW92 has been designed for direct current loads. Developed for both interrupted and uninterrupted loads, the SW92 is suitable for switching Resistive, Capacitive and Inductive loads.
The SW92 features single pole double breaking main contacts with silver alloy tips, which are weld resistant, hard wearing and have excellent conductivity. The SW92 has M8 stud main terminals and 6.3mm spade coil connections. Mounted using supplied brackets, can be horizontal or vertical, when vertical the M8 contact studs should point upwards. If the requirement is for downwards orientation we can adjust the contactor to compensate for this.
|Thermal Current Rating
|Intermittent Current Rating:
|Rated Fault Current Breaking Capacity (Icn) 5ms Time Constant: (In accordance with UL583*)
|800A at 80V D.C.
|800A at 48V D.C.
|Rated Fault Current Breaking Capacity (Icn) Resistive Load: (In accordance with UL508*)
|Maximum Recommended Contact Voltages
|Typical Voltage Drop per pole across New Contacts at 100A
|> 5,000,000 Cycles
|Coil Voltage Available (Us) (Rectifier board required for A.C.)
|6 - 240V
STANDARD - GOLD
V3 - GOLD
DIODE AND RESISTOR