The DC184 contactor has been designed for direct current loads, particularly motors as used on electric vehicles such as industrial trucks and airport tractors.
The DC184 has double breaking main contacts with silver alloy contact tips, which are weld resistant, hard wearing and have excellent conductivity. The DC184 is a monoblock construction, resulting in a neat compact design which is compatible with modern electronic control systems. Main terminals can be configured in a variety of ways in order to suit the application.
|Thermal Current Rating
|Intermittent Current Rating:
|Rated Fault Current Breaking Capacity (Icn) 5ms Time Constant: (In accordance with UL583*)
|1000A at 96V D.C.
|1000A at 48V D.C.
|Rated Fault Current Breaking Capacity (Icn) Resistive Load: (In accordance with UL508*)
|Maximum Recommended Contact Voltages
|Typical Voltage Drop per pole across New Contacts at 150A
|> 5,000,000 Cycles
|Coil Voltage Available (Us) (Rectifier board required for A.C.)
|6 - 240V
STANDARD - GOLD
V3 - GOLD
DIODE AND RESISTOR