You may have searched for a product type instead of a product, as a result you are seeing the parent product of the product type we have found.

SU190

NO - DP - ST

The SU190 is an up-rated variant of the SW190 Series of contactor primarily designed to switch heavy duty D.C. loads, however it is also capable of switching A.C. loads. The SU190 is suitable for switching Resistive, Capacitive and Inductive loads. Typical applications include electric motors, hydraulic power packs, winches, speed controllers and Power Distribution Systems.

The contactors feature double pole, double breaking main contacts with silver alloy tips, which are weld resistant, hard wearing and have excellent conductivity. The SU190 is easy to install, with M5 tapped holes in the switch frame or a variety of optional brackets available. Electrical connections follow industry standards, with M10 main terminal studs and an option for either 6.3mm standard spade terminals or flying leads on the coil assembly. Mounting can be vertical or horizontal, when vertical the M10 contact studs should point upwards. If the requirement is for downwards orientation we can adjust the contactor to compensate for this.

SU190 Technical Information

Application	InterruptedRating ( I_th )Uninterrupted
Thermal Current Rating	250A	350A
Intermittent Current Rating:
30% Duty	455A	640A
40% Duty	395A	555A
50% Duty	355A	495A
60% Duty	325A	450A
70% Duty	300A	420A
Rated Fault Current Breaking Capacity (Icn) 5ms Time Constant: (In accordance with UL583*)
Blowouts	1500A at 96V D.C.
No Blowouts	1500A at 48V D.C.
Rated Fault Current Breaking Capacity (Icn) Resistive Load: (In accordance with UL508*)
Blowouts	525A at 96V D.C.
No Blowouts	525A at 60V D.C.
Maximum Recommended Contact Voltages
Blowouts	250V	250V
No Blowouts	96V	96V
Typical Voltage Drop per pole across New Contacts at 250A	40mV

Mechanical Durability	> 3,000,000 Cycles
Coil Voltage Available (Us) (Rectifier board required for A.C.)	6 - 240V