Introducing the New ED80

Designed for the electric vehicle market, the ED80 is a new low current Emergency Disconnect switch.  Rated at 80 amperes with a Single Throw, Single Pole configuration this compact, low cost switch is primarily intended for use with battery powered vehicles but is also suitable for static power systems.  It is capable of safely rupturing full load battery currents in the event of an emergency.

The ED80 is a manually operated device with a simple over-centre spring mechanism which provides a "snap action" for both opening and closing the main contacts.  As with all our ED Disconnecting switches, the ED80 has been designed to provide rapid means of disconnecting batteries or other power supplies in the event of serious electrical faults.

The ED80 is an original design, competitively priced and easy to install, secured with supplied M5 posidrive mounting screws.

To view the ED80 Catalogue Sheet click here: ED80 Catalogue Sheet

All our catalogue information can be found on our website located under the Downloads section.

For further details concerning the ED80 Emergency Disconnect switch, please contact our technical department at: technical@albrightinternational.com

__________________________________________________________________________________

Albright Newsletter Issue 4

Issue 4 of the Albright Newsletter: Contact is now available.

Contact features new Albright products, items of interest and updates concerning Albright International and our subsidiaries.  In issue 4 you can read about our new ED80 Emergency Disconnect switch, meet our new UK Sales Team and learn more about our Sales Office, Albright Japan.  These are just some of the articles featured in our latest issue.

Our newsletter is fully bookmarked and hypertext linked to allow you to easily navigate the articles.  Please contact us if you require any further information concerning an item featured or you have any comments on the newsletter.

We hope you enjoy reading our 4th issue.

Click on the link to download Issue 4: Contact Issue 4

__________________________________________________________________________________

SW400 Catalogue Sheet Updated

The SW400 catalogue sheet has been revised to include additional information in the performance table and reflect our new catalogue design layout.

The SW400 is a busbar contactor rated at 400 amperes with a single pole, single throw, normally open configuration.  Designed for use in telecommunications and power distribution applications where the load is infrequently switched.  These contactors are primarily for use with direct current loads, however they can also be used with alternating currents.  Coil voltage can be in the range of 6 - 240 volts, and optional extras for the SW400 include auxiliary switches, brackets, a variety of coil finishes and magnetic latching, allowing the contactor to to remain closed while consuming no power.  Silver plating on the main contacts is specified as standard, although there is the option to have the main contacts without silver plating.

To view the new version of the SW400 catalogue sheet, click here: SW400 Catalogue Sheet

All our catalogue information can be found on our website located under the Downloads section.

For further details concerning the SW400 Contactor, please contact our techincal department at: technical@albrightinternational.com  

__________________________________________________________________________________

Updated SU190 Catalogue Sheet

The SU190 Catalogue Sheet has been updated to reflect our new catalogue sheet design.

An up-rated variant of the SW190 series of contactor, the SU190 has been designed to switch heavy duty D.C. loads.  Rated at 250 amperes for interrupted loads and 350 amperes for uninterrupted, it is suitable for switching Resistive, Capacitive and Inductive loads.  Typical applications include electric motors, hydraulic power packs, winches, speed controllers and Power Distribution Systems.  

To view the new version of the SU190 Catalogue Sheet, please click below:

SU190 Catalogue Sheet

All our catalogue information can be found on our website located under the Downloads section.

For further details concerning the SU190 contactor, please contact our technical department at: technical@albrightinternational.com

__________________________________________________________________

SW300 Catalogue Sheet Updated

The SW300 Catalogue sheet has been revised to include information concerning the Auxiliary 'C' Option and incorporate our new catalogue sheet design.

The SW300 has been designed specfically for the Telecom industry and to meet more demanding applications where an uninterrupted load is switched.  Rated at 300 ampere this compact busbar contactor is primarily for use with direct current loads however it can also be used for alternating currents. 

To view the new version of the SW300 Catalogue Sheet, please click below:

SW300 Catalogue Sheet

All our catalogue information can be found on our website under the Downloads section.

For any further information concerning the SW300 contactor, please contact technical on technical@albrightinternational.com

__________________________________________________________________________

SU80 Catalogue Sheet Updated

The SU80 Catalogue Sheet has been updated with the main changes being, inclusion of details concerning the 'C' Auxiliary option and a change to the layout of the information presented. 

The SU80 has the same footprint as the SW80 however it provides the thermal current rating of the SW180, resulting in a high rated contactor in a compact size. Rated at 150 Amperes for interrupted and 200 Amperes for Uninterrupted current loads, the SU80 is suitable for switching, Resistive, Capacitive and Inductive loads.  Typical applications include, but are not limited to, electric motors, hydraulic power packs, winches, speed controllers, UPS and Power Distribtuion Systems. A cost effective, alternative to existing devices on the market, the SU80 compares favourably with sealed automotive style solenoid switches which cannot be serviced or inspected for contact wear.

To view the new version of the SU80 Catalogue Sheet, please click here: SU80 Catalogue Sheet 

All our catalogue information can be found on our website under the Downloads section.

For any further information concerning this contactor, please contact technical on technical@albrightinternational.com

_____________________________________________________________________________